Quick Setup for Windows Mobile Device Center/ActiveSync®

This tutorial assumes the following:

You have already installed iSiloX on your system.
You have not yet started iSiloX for the first time.
You have Windows Mobile Device Center or ActiveSync® installed on your system.

With the above assumptions, this tutorial walks you through the initial quick setup for configuring iSiloX for your particular handheld device.

Step 1: If you did not modify the default installation options when you installed iSiloX, then you should have a desktop shortcut to iSiloX, like that shown below. Double-click the shortcut to start iSiloX.

Step 2: Assuming you have ActiveSync® installed, the very first time you start iSiloX, you get the Quick Setup for ActiveSync® dialog shown here:

Step 3: The name list should have a list of all ActiveSync® devices that connect to your system. Select your ActiveSync® device name from the Name list so that documents you convert can automatically be installed to your device when you next connect through ActiveSync®.

Step 4: iSiloX can optimize the output for your specific handheld model by setting up initial default settings for documents you convert. An example of this is choosing an appropriate size and color depth for images. Select the model that best matches your handheld from the Device list.

Step 5: After you have selected a name and device, click OK to complete the quick setup.

Step 6: iSiloX starts and is now ready for you to use.

Congratulations on completing the iSiloX quick setup. Next, if you follow the Convert an HTML Document from the Web and Convert a Text Document from Your Local Hard Drive tutorials, you should be on your way to knowing how to use iSiloX to create documents to view on your handheld.